- The Pentium as a Navajo weaving (righto.com)
Hurrying through the National Gallery of Art five minutes before closing, I passed a Navajo weaving with a complex abstract pattern. Suddenly, I realized the pattern was strangely familiar, so I stopped and looked closely. The design turned out to be an image of Intel’s Pentium chip, the start of the long-lived Pentium family. The weaver, Marilou Schultz, created the artwork in 1994 using traditional materials and techniques. The rug was commissioned by Intel as a gift to AISES (American Indian Science & Engineering Society) and is currently part of an art exhibition—Woven Histories: Textiles and Modern Abstraction—focusing on the intersection between abstract art and woven textiles.
- Antenna diodes in the Pentium processor (righto.com)
I was studying the silicon die of the Pentium processor and noticed some puzzling structures where signal lines were connected to the silicon substrate for no apparent reason. Two examples are in the photo below, where the metal wiring (orange) connects to small square regions of doped silicon (gray), isolated from the rest of the circuitry. I did some investigation and learned that these structures are “antenna diodes,” special diodes that protect the circuitry from damage during manufacturing. In this blog post, I discuss the construction of the Pentium and explain how these antenna diodes work.
- Interesting BiCMOS circuits in the Pentium, reverse-engineered (righto.com)
Intel released the powerful Pentium processor in 1993, establishing a long-running brand of processors. Earlier, I wrote about the ROM in the Pentium’s floating point unit that holds constants such as π. In this post, I’ll look at some interesting circuits associated with this ROM. In particular, the circuitry is implemented in BiCMOS, a process that combines bipolar transistors with standard CMOS logic.
- Reverse-engineering a carry-lookahead adder in the Pentium (righto.com)
Addition is harder than you’d expect, at least for a computer. Computers use multiple types of adder circuits with different tradeoffs of size versus speed. In this article, I reverse-engineer an 8-bit adder in the Pentium’s floating point unit. This adder turns out to be a carry-lookahead adder, in particular, a type known as “Kogge-Stone.“1 In this article, I’ll explain how a carry-lookahead adder works and I’ll show how the Pentium implemented it. Warning: lots of Boolean logic ahead.
- Intel’s $475 million error: the silicon behind the Pentium division bug (righto.com)
In 1993, Intel released the high-performance Pentium processor, the start of the long-running Pentium line. The Pentium had many improvements over the previous processor, the Intel 486, including a faster floating-point division algorithm. A year later, Professor Nicely, a number theory professor, was researching reciprocals of twin prime numbers when he noticed a problem: his Pentium sometimes generated the wrong result when performing floating-point division. Intel considered this “an extremely minor technical problem”, but much to Intel’s surprise, the bug became a large media story. After weeks of criticism, mockery, and bad publicity, Intel agreed to replace everyone’s faulty Pentium chips, costing the company $475 million.
- Notes on the Pentium’s microcode circuitry (righto.com)
Most people think of machine instructions as the fundamental steps that a computer performs. However, many processors have another layer of software underneath: microcode. With microcode, instead of building the processor’s control circuitry from complex logic gates, the control logic is implemented with code known as microcode, stored in the microcode ROM. To execute a machine instruction, the computer internally executes several simpler micro-instructions, specified by the microcode. In this post, I examine the microcode ROM in the original Pentium, looking at the low-level circuitry.
multiply by three circuit
- The Pentium contains a complicated circuit to multiply by three (righto.com)
In 1993, Intel released the high-performance Pentium processor, the start of the long-running Pentium line. I’ve been examining the Pentium’s circuitry in detail and I came across a circuit to multiply by three, a complex circuit with thousands of transistors. Why does the Pentium have a circuit to multiply specifically by three? Why is it so complicated? In this article, I examine this multiplier—which I’ll call the ×3 circuit—and explain its purpose and how it is implemented.
- Pi in the Pentium: reverse-engineering the constants in its floating-point unit (righto.com)
Intel released the powerful Pentium processor in 1993, establishing a long-running brand of high-performance processors.1 The Pentium includes a floating-point unit that can rapidly compute functions such as sines, cosines, logarithms, and exponentials. But how does the Pentium compute these functions? Earlier Intel chips used binary algorithms called CORDIC, but the Pentium switched to polynomials to approximate these transcendental functions much faster. The polynomials have carefully-optimized coefficients that are stored in a special ROM inside the chip’s floating-point unit. Even though the Pentium is a complex chip with 3.1 million transistors, it is possible to see these transistors under a microscope and read out these constants. The first part of this post discusses how the floating point constant ROM is implemented in hardware. The second part explains how the Pentium uses these constants to evaluate sin, log, and other functions.
- Standard cells: Looking at individual gates in the Pentium processor (righto.com)
Intel released the powerful Pentium processor in 1993, a chip to “separate the really power-hungry folks from ordinary mortals.” The original Pentium was followed by the Pentium Pro, the Pentium II, and others, spawning a long-running brand of high-performance processors, Intel’s flagship line until the Core processors took over in 2006. The Pentium eventually became virtually synonymous with “PC” and even made it into pop culture.